Router Cisco CISCO2901/K9 cung cấp mức độ tích hợp dịch vụ ngày càng tăng với các dịch vụ dữ liệu, an ninh, không dây và di động, cho hiệu quả cao hơn và tiết kiệm chi phí.
Router Cisco CISCO2901/K9 cho phép triển khai trong môi trường WAN tốc độ cao với các dịch vụ đồng thời cho phép lên đến 75 Mbps.
Router Cisco CISCO2901/K9 được thiết kế để đáp ứng các yêu cầu kinh doanh của khách hàng, CISCO2901/K9 với 4 EHWIC slots cung cấp một loạt hiệu suất các giao diện module và các dịch vụ khi mạng của bạn cần phát triển
Thông số kĩ thuật:
Services and Slot Density | |
Embedded Hardware-Based Cryptography and Acceleration | Yes |
Cisco Unified SRST Sessions | 35 |
Cisco Unified CCME Sessions | 35 |
Total Onboard WAN 10/100/1000 Ports | 2 |
RJ-45-Based Ports | 2 |
SFP-Based Ports (use of SFP port disables the corresponding | 0 |
Service Module Slots | 0 |
Double-Wide Service Module Slots (use of a double-wide slot will occupy all single-wide service module slots in a 2900) | 0 |
EHWIC Slots | 4 |
Double-Wide EHWIC Slots (use of a double-wide EHWIC slot will consume two EHWIC slots) | 2 |
ISM Slots | 1 |
Onboard DSP (PVDM) Slots | 2 |
Memory DDR2 ECC DRAM - Default | 512 MB |
Memory (DDR2 ECC DRAM) - Maximum | 2 GB |
Compact Flash (External) - Default | slot 0: 256 MB slot 1: none |
Compact Flash (External) - Maximum | slot 0: 4 GB slot 1: 4 GB |
External USB 2.0 Flash Memory Slots (Type A) | 2 |
USB Console Port (Type B) (up to 115.2 kbps) | 1 |
Serial Console Port | 1 |
Serial Auxiliary Port | 1 |
Power-Supply Options | AC and PoE |
RPS Support (External) | No |
Power Specifications | |
AC Input Voltage | 100 to 240 VAC auto ranging |
AC Input Frequency | 47 to 63 Hz |
AC Input Current Range AC Power Supply (Maximum) | 1.5 to 0.6A |
AC Input Surge Current | <50A |
Typical Power (No Modules) (Watts) | 40 |
Maximum Power with AC Power Supply (Watts) | 150 |
Maximum Power with PoE Power Supply (Platform Only) (Watts) | 175 |
Maximum Power with DC-PoE Power Supply (Platform Only) (Watts) | - |
Maximum End-Point PoE Power Available from AC PoE Power Supply (Watts) | 130 |
Maximum End-Point PoE Power Available from DC PoE Power Supply (Watts) | - |
Maximum End-Point PoE Power Capacity with PoE Boost (Watts) | N/A |
DC Input Voltage | N/A |
DC Input Current | N/A |
Physical Specifications | |
Dimensions (H x W x D) | 1.75 x 17.25 x 17.3 in. (44.5 x 438.2 x 439.4 mm) |
Rack Height | 1RU (rack unit) |
Rack-Mount 19 in. (48.3 cm) EIA | Included |
Rack-Mount 23 in. (58.4 cm) EIA | Optional |
Wall-Mount (refer to installation guide for approved orientation) | Yes |
Weight with AC Power Supply (No Modules) | 13.4 lb (6.1 kg) |
Weight with AC PoE Power Supply (No Modules) | 14.3 lb (6.5 kg) |
Typical Weight Fully Configured | 16 lb (7.3 kg) |
Airflow | Front to side |
Optional Airflow Kit | N/A |
Environmental Specifications | |
Operating Conditions | |
Temperature: 5,906 feet (1,800m) Maximum Altitude | 32 to 104ºF (0 to 40ºC) |
Temperature: 9,843 feet (3,000m) Maximum Altitude | 32 to 77ºF (0 to 25ºC) |
Temperature: 13,123 feet (4,000m) Maximum Altitude | N/A |
Temperature: Short-Term (per NEBS) 5906 feet (1,800m) Maximum Altitude | N/A |
Altitude | 10,000 ft (3,000m) |
Relative Humidity | 10 to 85% |
Short-Term (per NEBS) Humidity | N/A |
Acoustic: Sound Pressure (Typical/Maximum) | 41/53 dBA |
Acoustic: Sound Power (Typical/Maximum) | 49/61 dBA |
Non-Operating Conditions | |
Temperature | -40 to 158ºF (-40 to 70ºC) |
Relative Humidity | 5 to 95% |
Altitude | 15,000 ft (4,570m) |
Regulatory Compliance | |
Safety | UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 |
EMC | 47 CFR, Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1 |
Telecom | TIA/EIA/IS-968 CS-03 ANSI T1.101 ITU-T G.823, G.824 IEEE 802.3 RTTE Directive |