Bộ lưu điện UPS APC BX625CI-MS: APC Back-UPS 625VA, 230V, AVR, Floor, Universal Sockets. APC Back-UPS,325 Watts /625 VA,Input 230V /Output 230V, Extended runtime model . Typical Backup Time at Full Load 1 minutes (325 Watts)
Thông số kĩ thuật:
Output
Output Power Capacity
325 Watts / 625 VA
Max Configurable Power
325 Watts / 625 VA
Nominal Output Voltage
230V
Efficiency at Full Load
65.3%
Topology
Line Interactive
Waveform Type
Square wave
Output Connections
(3) Universal Receptacle (Battery Backup) |
Efficiency at Half Load
75.8%
Input
Nominal Input Voltage
230V
Input Frequency
45 - 65 Hz
Input Connections
IEC-320 C14 |
Cord Length
1.22 meters
Input voltage range for main operations
151 - 299V
Maximum Input Current
3A
Input Breaker Capacity
7 A
Type of Input Protection Required
3-pole breaker
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
1
Typical recharge time
6 hour(s)
Replacement Battery
(Service center technician only)
(Service center technician only)
APCRBC110
Extended Run Options
APC Back-UPS 625VA, 230V, AVR, Floor, Universal Sockets
Runtime Graph
Surge Protection and Filtering
Surge energy rating
273 Joules
Physical
Maximum Height
278.00 mm
Maximum Width
160.00 mm
Maximum Depth
88.00 mm
Net Weight
5.00 KG
Shipping Weight
5.20 KG
Shipping Height
399.00 mm
Shipping Width
215.00 mm
Shipping Depth
128.00 mm
Master Carton Units
1.00
Color
Black
SCC Codes
1073130430817 8
Units per Pallet
100.00
Environmental
Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95%
Storage Temperature
-15 - 40 °C
Storage Relative Humidity
0 - 95%
Audible noise at 1 meter from surface of unit
45.00 dBA
Conformance
Standard Warranty
2 years repair or replace
Sustainable Offer Status
RoHS
Compliant
REACH
REACH: Contains No SVHCs
Bộ lưu điện UPS APC BX625CI-MS
BX625CI-MS Features
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Overload protection
Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Back-UPS Features & Benefits
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.