Phân phối Bộ phát wifi Fortinet FortiAP AP832e Indoor Wireless Access Point dual radio 802.11ac Wave 1, Dual Radio 2.4 GHz and 5 GHz, Up to 1,300 + 1,300 Mbps, 3x3 MIMO, 6 External Antennas Chính hãng giá tốt
✓ Mã sản phẩm: AP832e
✓ Tình trạng: Còn Hàng
AP832e FortiAP AP832e Indoor Wireless Access Point
Part Number | : AP832e |
List Price | : $1,000 |
Giá bán | : Giá rẻ nhất thị trường |
Bảo hành | : 12 tháng |
Made In | : Liên hệ |
Stock | :Sẵn hàng |
Mô tả tổng quan
Fortinet FortiAP AP832e cung cấp cho người dùng mạng Gigabit WiFi bằng cách sử dụng công nghệ wifi 802.11ac wave 1 toàn diện, hiệu suất cao, mang lại một trải nghiệm wifi hoàn toàn mới, tiếp cận nhiều đối tượng khách hàng hơn.
Fortinet FortiAP AP832e cho phép quản trị viên có khả năng ưu tiên các ứng dụng để cải thiện trải nghiệm người dùng. Ví dụ đối với trường học, ứng dụng Hệ thống quản lý học tập có thể được gán cho một lớp kênh chuyên dụng, trong khi nguồn cấp dữ liệu video trực tuyến trên lớp học có thể được dành riêng cho một lớp kênh khác, với công nghệ Virtual Cell channel layering độc đáo của Fortinet. Đối với bệnh viện, các ứng dụng quan trọng trong cuộc sống như giám sát bệnh nhân có thể được gán động cho một lớp kênh, ứng dụng dành cho bác sĩ và điều dưỡng có thể được gán cho kênh thứ hai và ứng dụng bệnh nhân có thể được đặt trên kênh thứ ba
Thông số kỹ thuật FortiAP AP832e
TECHNOLOGY | |
OPERATING MODES | Centralized deployment mode Distributed deployment mode MESH mode Bridge mode Remote VPN tunnel mode |
QOS | 802.11E support (including WMM) Dynamic WMM rate adaptation Configurable QoS rules per user and application |
SECURITY | WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5) 802.1X and captive portal authentication against local database on the controller, RADIUS, and Active Directory RADIUS-assisted per-user and per-ESSID access control via MAC filtering |
MANAGEMENT | Centrally managed by any Fortinet controller running System Director 6.1 or later Automatically discovers controllers and downloads configuration settings for plug-and-play deployment Upgrades and management via System Director / Network Manager Support for SNMP Concurrent Clients Per Radio (Maximum / Recommended) — 128 / 40 |
WIRELESS SPECIFICATIONS | |
Model Introduction | dual-radio, dual-band IEEE Std 802.11a/b/g/n/ac access point with six RP-SMA connectors and six external omnidirectional antennas |
Supported Radio Technologies | Dual-band, dual-radio access point 3x3:3SS (three spatial streams) Indoor application Supported 2.4 GHz (TurboQAM Mode) and 5.x GHz for dual-band, dual-radio operation, data rate up to 1.9 Gbps Supported dual 5.x GHz IEEE Std 802.11ac operation with RF collocation (FCC Permit by Ask provision), data rate up to 2.6 Gbps Supported transmit beam-forming (TxBF) IEEE Std 802.11ac standard IEEE Std 802.11n/ac with Orthogonal Frequency Division Multiplexing (OFDM) IEEE Std 802.11b with Direct Sequence Spread Spectrum (DSSS) IEEE Std 802.11ac with 20/40/80 MHz (VHT20/40/80) channel width IEEE Std 802.11n with 40 MHz (HT40) channel width IEEE Std 802.11a/g with 20 MHz channel IEEE Std 802.11b with 22 MHz channel |
Supported Modulation | IEEE Std 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM IEEE Std 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM IEEE Std 802.11b: BPSK, QPSK, CCK Featured 256-TurboQAM modulation for 2.4 GHz and 5 GHz operations |
Supported MCS Index | Supported MCS0–MCS9 (NSS=1-3) for IEEE Std 802.11ac Supported MCS0–MCS23 for IEEE Std 802.11n |
Supported Frequency Bands | 2.400–2.4835 GHz (ISM) 5.150–5.250 GHz (UNII-1) 5.250–5.350 GHz (UNII-2, DFS) 5.470–5.725 GHz (UNII-2 Extended, DFS) 5.725–5.825 GHz (UNII-3) Country-specific restrictions apply; adjusted by controller upon approva |
Operating Channels |
|
Supported Data Rate (Mbps) | IEEE Std 802.11ac three streams: 19.5–1300 Mbps (MCS0-HT20@800nS to MCS9-HT40@400nS) IEEE Std 802.11ac per stream: 6.5–433.3 Mbps (MCS0-HT20@800nS to MCS9-HT40@400nS) IEEE Std 802.11n Three streams: 13–450 Mbps (MCS9-HT20@800nS to MCS23-HT40@400nS) IEEE Std 802.11n Per stream: 6.5–150 Mbps (MCS0-HT20 @ 800nS to MCS7-HT40@400nS) IEEE Std 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE Std 802.11b: 1, 2, 5.5, 11 Mbps |
PHYSICAL SPECIFICATIONS | |
Power | Operates at IEEE 802.3af power Powered by IEEE Std 802.3af or 802.3at PoE (Power over Ethernet) injector or switch 12V external power adapter (sold separately) |
Other Interfaces | Networks: One 10/100/1000 Mbps Base-T Ethernet RJ-45 port for Data uplink (G1) supports only 802.3af PoE. One 10/100/1000 Mbps Base-T Ethernet RJ-45 port for Data uplink (G2) requires 802.3at PoE. Six RPSMA RF connectors for external antenna SKU (AP832e) One console port One reset button One Kensington security slot |
LED Indicators | One tri-color LED for AP status Additional LEDs for Ethernet activity over two RJ45 ports (G1 & G2) |
Mounting | Wall, desktop, or ceiling mount Three mounting kits included with access point: – 650-00232, 15/16” T-bar and wall-mount combo adapter – 650-00233, 9/16” T-bar adapter – Flat-surface wall-mount bracket (used with 650-00232) |
Option (ordered separately) | CBL-SERIAL-DB9-35, DB9-stereo console cable CBL-RJ45-ADAPT-X5, GE extension adapter MNT-FEET-SET-X5, rubber feet for desktop staging |
Installation in the Air-Handling Space | metal enclosure only by removing plastic façade |
Dimensions | with mounting bracket: 7.1 x 7.1 x 2.7 inches (18.0 x 18.0 x 6.8 cm) without plastic façade: 6.3 x 6.3 x 2.1 inches (16.1 x 16.0 x 5.2 cm) |
Weight | with mounting bracket: 1.9 lbs (0.9 kg) without facade and mounting bracket: 1.5 lbs (0.7 kg) |
Environmental | Operating temperature: 32–122°F (0–50°C) Operating humidity: 5–95% non-condensing Storage temperature: -40–158°F (-40–70°C) ambient Storage humidity: 5–95% non-condensing |
REGULATORY APPROVAL | |
REGULATORY APPROVAL | LFCC (United States of America) CE Mark (European Community) Industry Canada (Canada) TELEC (Japan) Safety Approval (worldwide) For more country-specific regulatory approval, please contact your Fortinet representative |
CERTIFICATIONS | |
CERTIFICATIONS | WiFi CERTIFIED™ EU RoHS CB Report |
Antenna Model FortiAP AP832e
Internal Antenna | 2.4–2.5 GHz | 4.9–5.9 GHz |
Average Antenna Gain | 3.3 dBi | 6.0 dBi |
Polarization | Linear | Linear |
Azimuth Beam-width | 360° | 360° |
Elevation Beam-width | 75° | 55° |
VSWR | 1:1.5 | 1:1.5 |
Antenna sử dụng cho FortiAP AP832e
MODEL NUMBER | DESCRIPTION |
ANT-6ABGN-24 | 2.4/5.x GHz 2.5/4 dBi directional patch wall/pole-mount antenna, with 36-inch external coaxial cables and 6x RP-SMA male jacks |
ANT-I3ABGN-0304 | 2.4/5.x GHz 3/4 dBi omnidirectional ceiling mount antenna, with 36-inch external coaxial cables and 3x RP-SMA male jacks |
ANT-6ABGN-24 | 2.4/5.x GHz 2.5/4 dBi directional patch wall/pole-mount antenna, with 36-inch external coaxial cables and 6x RP-SMA male jacks |
ANT-I3ABGN-0304 | 2.4/5.x GHz 3/4 dBi omnidirectional ceiling mount antenna, with 36-inch external coaxial cables and 3x RP-SMA male jacks |
ANT-ABGN-23 | 2.4/5.x GHz 3/4 dBi directional patch wall/pole-mount antenna, with 60-inch external coaxial cables and 6x RP-SMA male jacks |
ANT-ABGN23O-W | 2.4/5.x GHz 2/3 dBi omnidirectional rubber ducky antenna with 1x RP-SMA male jacks |
ANT-ABGN47O | 2.4/5.x GHz 4.7/4.7 dBi omnidirectional rubber ducky antenna with 1x RP-SMA make jack |
ANT-I2ABGN-0304-O | 2.4/5.x GHz 3/4 dBi omnidirectional ceiling mount antenna, with 36-inch external coaxial cables and 2x RP-SMA male jacks |
ANT-O6ABGN-0607-PT | 2.4/5.x GHz 6/7 dBi directional patch wall/pole-mount antenna, with 36-inch external coaxial cables and 6x RP-SMA male jacks |
ANT-06ABGN-0606-O | 2.4/5.x GHz 6/6 dBi omnidirectional wall/pole-mount antenna, with 36-inch external coaxial cables and 6x RP-SMA male jacks |