Cisco AIR-AP1562I-C-K9 Aironet 1560 Dual-band 802.11a/g/n/ac Wave 2 Access Point, internal semi-omni antennas, Support 400 User.
✓ Mã sản phẩm: AIR-AP1562I-C-K9
✓ Tình trạng: Còn Hàng
Bộ phát wifi Cisco Aironet AIR-AP1562I-C-K9 lý tưởng cho các ứng dụng yêu cầu vùng phủ sóng Wi-Fi ngoài trời và hỗ trợ chuẩn vô tuyến 802.11ac Wave 2 mới nhất. Được thiết kế nhỏ gọn, thẩm mỹ, dễ triển khai, AIR-AP1562I-C-K9 cung cấp các tùy chọn triển khai linh hoạt cho các nhà cung cấp dịch vụ và mạng doanh nghiệp cần liên kết nhanh nhất có thể cho khách hàng di động ngoài trời (điện thoại thông minh, máy tính bảng và máy tính xách tay) và mạng không dây.
AIR-AP1562I-C-K9 cung cấp cho các doanh nghiệp sự linh hoạt để cân bằng vùng phủ sóng không dây mong muốn của họ với nhu cầu triển khai dễ dàng.
Thông số kỹ thuật Cisco Aironet AIR-AP1562I-C-K9 Access Point:
Item | Specification |
802.11ac Wave 1 and 2 capabilities | - 3 x 3 MIMO with three spatial streams - Multi- and single-user MIMO - Maximal ratio combining (MRC) - 802.11ac beamforming (transmit beamforming) - 20-, 40-, and 80-MHz channels - PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx) - 802.11 dynamic frequency selection (DFS) - Cyclic-shift-diversity (CSD) support |
802.11n (and related) capabilities | - 1562I: 3 x 3 MIMO with three spatial streams - MRC - 20- and 40-MHz channels - PHY data rates up to 450 Mbps - Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx) - - 802.11 DFS - CSD support |
Frequency band and 20- MHz operating channels (regulatory domains) | 2.412 to 2.472 GHz, 13 channels 5.500 to 5.700 GHz, 11 channels 5.745 to 5.825 GHz, 5 channels |
Maximum number of nonoverlapping channels | 2.4 GHz - 802.11b/g: 20 MHz: 3 - 802.11n: 20 MHz: 3 40 MHz: 1 (hardware capable) 5 GHz - 802.11a: 20 MHz: 27 - 802.11n: 20 MHz: 27 40 MHz: 13 - 802.11ac: 20 MHz: 27 40 MHz: 13 80 MHz: 6 |
Note: This number varies by regulatory domain. Refer to the product documentation f or specific details f or each regulatory domain. | |
Maximum conducted transmit power | 1562I - 2.4 GHz: 29 dBm with 3 antennas - 5 GHz: 29 dBm with 3 antennas |
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation f or specific details. | |
Interfaces | - WAN port 10/100/1000BASE-TEthernet,autosensing (RJ-45), PoE in - SFP port (fiber or electrical) - Management console port (RJ-45) - Multicolor LED - DC power input - Reset button |
Uplink options | Ethernet, SFP, and wireless mesh (future availability) |
Dimensions | 9.0 x 6.8 x 3.9 in. (22.9 x 17.1 x 9.8 cm) |
Weight | 5.6 lb (2.5 kg) |
Environmental | Operating temperature: - –40to65°C (–40to 149°F) ambient airwith nosolar loading - –40to 55°C (–40to131°F) ambient airwith solar loading Storage temperature: –40 to 85°C (–40 to 185°F) Humidity: 5 - 95%, non-condensing Wind resistance: - Up to 100-mph sustained winds - Up to 165-mph wind gusts |
Environmental ratings | - IEC 60529 IP67 - NEMA Type 4X - Icing protection NEMA 250-2008 - Corrosion NEMA 250-2008 (600 hours) - Solar radiation EN 60068-2-5 (1200 W/ m2) - Vibration MIL-STD-810 |
Antennas | - Integrated dual-band semi-omnidirectional antenna radome, 7 dBi (2.4 GHz), 4 dBi (5 GHz) - Dual Band ◦ AIR-ANT2568VG-N 6 dBi (2.4 GHz), 8 dBi (5 GHz) Omni ◦ AIR-ANT2547VG-N 4 dBi (2.4 GHz), 7 dBi (5 GHz) Omni ◦ AIR-ANT2547V-N 4 dBi (2.4 GHz), 7 dBi (5 GHz) Omni ◦ AIR-ANT2588P3M-N= 8 dBi (2.4 GHz), 8 dBi (5 GHz) Directional ◦ AIR-ANT2513P4M-N= 13 dBi (2.4 GHz), 13 dBi (5 GHz) Directional - Single Band 2.4 GHz ◦ AIR-ANT2450V-N= 5 dBi (2.4 GHz), Omni ◦ AIR-ANT2450VG-N= 5 dBi (2.4 GHz), Omni, vertical polarized ◦ AIR-ANT2450HG-N= 5 dBi (2.4 GHz), Omni, horizontal polarized ◦ AIR-ANT2480V-N= 8 dBi (2.4 GHz), Omni ◦ AIR-ANT2413P2M-N= 13 dBi (2.4 GHz), Directional, dual polarized 5 GHz ◦ AIR-ANT5150VG-N= 5 dBi (5GHz), Omni, vertical polarized ◦ AIR-ANT5150HG-N= 5 dBi (5GHz), Omni, horizontal polarized ◦ AIR-ANT5180V-N= 8 dBi (5GHz), Omni ◦ AIR-ANT5114P2M-N= 14 dBi (5GHz), Directional, dual polarized |
Powering options | - AC (with AIR-PWRADPT-RGD1=, AC/DC outdoor power adapter) - 44–57 VDC input - Universal Power of Ethernet (UPoE), 802.3at - Cisco power injectors: AIR-PWRINJ-60RGD1= (outdoor rated, 60W, with NEMA 5-15 AC plug) AIR-PWRINJ-60RGD2= (outdoor rated, 60W, unterminated AC cable) AIR-PWRINJ6= (indoor, 802.3at) Note: If 802.3at Power over Ethernet (PoE) is the source of power, the 1562I radios will shift from 3 x 3 to 2 x 2. |
Power consumption | 32 W (3x3:3, full power) |
Compliance | Safety - UL60950, 2nd Edition - CAN/CSA-C22.2 No. 60950, 2nd Edition - IEC 60950, 2nd Edition - EN 60950, 2nd Edition Immunity - <= 5 mJ f or 6kV/3kA @ 8/20ms waveform - ANSI/IEEE C62.41 - EN61000-4-5 Lev el 4 AC Surge Immunity - EN61000-4-4 Lev el 4 Electrical Fast Transient Burst Immunity - EN61000-4-3 Lev el 4 EMC Field Immunity - EN61000-4-2 Lev el 2 ESD Immunity - EN60950 Overvoltage Category IV Radio Approvals - FCC Part 15.247, 15.407 - FCC Bulletin OET-65C - RSS-247 - RSS-102 - AS/NZS 4268.2003 - ARIB-STD 66 (Japan) - ARIB-STD T71 (Japan) - EN 300 328 - EN 301 893 EMI and Susceptibility - FCC part 15.107, 15.109 - ICES-003 - EN 301 489-1, -17 Security - Wireless bridging/mesh (future availability) - X.509 digital certificates - MAC addressauthentication - Advanced Encryption Standard (AES) Wireless Access - 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA - 802.1X authentication, including Extensible Authentication Protocol (EAP) and Protected EAP (EAP -PEAP), EAPTransport Layer Security (EAP-TLS), EAP-TunneledTLS (EAP-TTLS),EAP-Subscriber IdentityModule - (EAP-SIM), and Cisco LEAP - VPN pass-through - IP Security (IPsec) - Layer 2 Tunneling Protocol(L2TP) - MAC address filtering |
