Switch Planet 48 port 10/100/1000T layer 3 - SGS-6341-48T4X + 4 Port 10G SFP

MUA HÀNG TỪ XA - GỌI

Mua điện thoại giao tận nơi
Hỗ trợ đặt hàng
(04) 3537 9388

Switch Planet 48 port 10/100/1000T layer 3 - SGS-6341-48T4X + 4 Port 10G SFP

SGS-6341-48T4X
18,752,000

Trạng thái: Sẵn hàng

24 tháng Planet

Mô tả sơ bộ sản phẩm

 

Copper Ports

48 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP+ Slots

4 10GBASE-SR/LR SFP+ interface (port-49 to port-52)
Compatible with 1000BASE-SX/LX/BX SFP transceiver

Console

1 x RJ45-to-RS232 serial port (115200, 8, N, 1)

Switch Architecture

Store-and-forward

 

Khuyễn mãi khi mua hàng

* Giới thiệu chung về switch Planet 48 port 10/100/1000T layer 3 - SGS-6341-48T4X:

High Performance 10Gbps Ethernet Capacity

The four SFP+ slots built in the SGS-6341-48T4X boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 176Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Each of the SFP+ slots supports Dual-Speed10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.

IP Stacking Management

The SGS-6341-48T4X supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network.

High Availability Mesh Networking Solution for Big Data System

By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-48T4X offers up to 176Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SGS-6341-48T4X features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-6341-48T4X is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm.

Layer 3 Routing Support

The SGS-6341-48T4X enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.

Full IPv6 Support

The SGS-6341-48T4X provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

Robust Layer 2 Features

The SGS-6341-48T4X can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341-48T4X allows the operation of a high-speed trunk combined with multiple ports. It enables up to 16 groups for trunking with a maximum of 8 ports for each group.

- Thông số kĩ thuật switch Planet 48 port 10/100/1000T layer 3 - SGS-6341-48T4X:

Physical Ports

  • 48 10/100/1000BASE-T Gigabit Ethernet RJ45 ports

  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP

  • RJ45 to DB9 console interface for switch basic management and setup

 

IP Stacking

  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together

 

IP Routing Features

  • IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
  • Routing interface provides per VLAN routing mode
  • VRRPv1/v3 protocol for redundant routing deployment
  • Supports route redistribution

 

Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2

 

Layer 2 Features

  • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
  • Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
  • Auto-MDI/MDI-X detection on each RJ45 port

Prevents packet loss flow control

- IEEE 802.3x pause frame flow control in full-duplex mode

- Back-pressure flow control in half-duplex mode

High performance Store-and-Forward architecture, broadcast storm control, port loopback detect

16K MAC address table, automatic source address learning and aging

Supports VLAN

- IEEE 802.1Q tag-based VLAN

- GVRP for dynamic VLAN management

- Up to 256 VLANs groups, out of 4041 VLAN IDs

- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported

- Private VLAN Edge (PVE) supported

- GVRP protocol for Management VLAN

- Protocol-based VLAN

- MAC-based VLAN

- IP subnet VLAN

Supports Link Aggregation

- Maximum 12 trunk groups, up to 8 ports per trunk group

- IEEE 802.3ad LACP (Link Aggregation Control Protocol)

- Cisco ether-channel (static trunk)

Supports Spanning Tree Protocol

- STP, IEEE 802.1D (Classic Spanning Tree Protocol)

- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)

- Supports BPDU & root guard

Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)

Provides port mirror (many-to-1)

Hardware Specifications

Copper Ports

48 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP+ Slots

4 10GBASE-SR/LR SFP+ interface (port-49 to port-52)
Compatible with 1000BASE-SX/LX/BX SFP transceiver

Console

1 x RJ45-to-RS232 serial port (115200, 8, N, 1)

Switch Architecture

Store-and-forward

Switch Fabric

176Gbps/non-blocking

Switch Throughput

130.95Mpps

Address Table

16K MAC address table with auto learning function

Shared Data Buffer

1.5MB

Flow Control

Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex

Jumbo Frame

10KB

LED

System:
 PWR/MGMT/SYS
Ports:
 10/100/1000T RJ45 Port: LNK/ACT
 1/10G SFP+ slot: LNK/ACT

Dimensions (W x D x H)

440 x 240 x 43.6 mm, 1U height

Weight

3471g

Power Consumption

46.4 watts/158.22 BTU

Power Requirements

AC 100~240V, 50/60Hz

Management Function

System Configuration

Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3

Management

Supports both IPv4 and IPv6 addressing
Supports the user IP security inspection for IPv4/IPv6 SNMP
Supports MIB and TRAP
Supports IPv4/IPv6 FTP/TFTP
Supports IPv4/IPv6 NTP
Supports RMON 1, 2, 3, 9 four groups
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
Supports IPv4/IPv6 SSH
The right configuration for users to adopt RADIUS server’s shell management
Supports CLI, console, Telnet
Supports SNMP v1, v2c and v3
Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area 
Supports Syslog server for IPv4 and IPv6
Supports TACACS+

IPv4 Layer 3 functions

IP Routing Protocol

Static route, RIPv1/v2, OSPFv2, BGPv4
Policy-based routing (PBR)
LPM routing (MD5 authentication)

Multicast Routing Protocol

IGMP v1/v2/v3, DVMRP, PIM-DM/SM, PIM-SSM

Layer 3 Protocol

VRRP v1/v3, ARP, ARP Proxy

 

Rất vui lòng nhận được chia sẻ và đánh giá của Bạn! Có bất kỳ thắc mắc gì bạn có thể để lại tin nhắn tại đây, chúng tôi sẽ giải đáp mọi yêu cầu

  1 sao 2 sao 3 sao 4 sao 5 sao
Chất lượng
Dịch vụ
Giá sản phẩm